Zhao En - Engineering tutor - Bedok
1st lesson free
Zhao En - Engineering tutor - Bedok

Zhao En's profile, qualifications and contact details have been verified by our experts

Zhao En

  • Rate S$35
  • Response 1h
Zhao En - Engineering tutor - Bedok

S$35/h

1st lesson free

Contact

1st lesson free

1st lesson free

  • Engineering
  • Electronics

Have a project but no confidence to start? Feel behind on technical skills? Or just need help bringing an idea to life? --- I can help with all three!

  • Engineering
  • Electronics

Lesson location

About Zhao En

I'm a university engineering student and a hands-on maker. Most of what I know I taught myself through breaking things, rebuilding them, and refusing to give up when a print failed or a board didn't work. That's exactly why I'm good at teaching this: I remember what it felt like not to understand, so I explain things simply, without assuming you already know the jargon.

I work with laser cutting machines, CNC machines, 3D printers (FDM and resin), CAD software like SolidWorks and Fusion 360, PCB design in KiCad and EasyEDA, and I solder and rework boards by hand. I build replacement parts, enclosures, and small prototypes. From a rough idea to something you can actually hold and use.

You can learn the practical core of it by designing, printing, and building with the tools you already have and a patient person walking you through it. My lessons are relaxed, 1-on-1, and built around your goal. We go at your pace, and I make sure you understand why we do each step, not just copy what I click.

Whether you're a complete beginner, a student working on a project, or someone with an idea you've been sitting on for ages, I'd love to help you bring it to life. If you're ready to stop watching and start building, send me a message. So tell me what you want to make, and we'll figure out the best way to get there.

See more

About the lesson

  • All levels
  • English
  • Mandarin

All languages in which the lesson is available :

English

Mandarin

I build things — and I'll teach you to build them too.

My lessons are practical, beginner-friendly, and free of heavy math. We work on real skills you can use immediately, one step at a time, with lots of patience and clear explanations.

What I teach
• 3D printing — slicing, orientation, tolerances, materials, troubleshooting (FDM and resin)
• CAD modeling — SolidWorks, Fusion 360, Onshape: parts, enclosures, replacement parts
• PCB design — schematic capture and layout in KiCad and EasyEDA, ready for manufacture
• Soldering and rework — through-hole and SMD basics, hot-air work
• Enclosure and prototype design — from concept to a build-ready package

How lessons work
Every lesson is 1-on-1 and tailored to your level. We start from where you are, pick a small goal, and finish with something real — a modeled part, a working board design, or a print-ready file. You build along with me on screen-share, and I explain the "why" behind each step so you can do it alone next time.

Who it's for
Complete beginners, students, hobbyists, and anyone who wants to turn an idea into something physical. If you've ever felt behind on technical skills or stuck with a project you can't finish, this is for you.

Online or in person
CAD, PCB design, and 3D printing/slicing run perfectly online. Soldering and resin work are hands-on, so I offer those in person.

Bundles
Start with a single session to try it, or pick a project bundle and go from idea to a finished, documented build.

Have a project in mind? Tell me what you're building — a broken part to redesign, a board idea, or a full prototype — and I'll put together a plan and a quote for you. No heavy math. Practical skills only. Let's build something.

See more

Rates

Rate

  • S$35

Pack rates

  • 5h: S$157
  • 10h: S$280

free lessons

This first lesson is free to allow you to get to know your teacher so that they can best meet your needs.

  • 30mins

online

  • S$35/h

Details

Base rate
• Online lessons (CAD, PCB design, 3D printing/slicing): SGD 35 / hour
• In-person lessons (soldering & rework): SGD 45 / hour; all equipment and materials provided!
• Minimum booking: 1 hour; most students choose 2-hours, where I make sure you have a completed work after every lesson.

Trial lesson
• First 30-minute consultation is free — we talk through your goal and I recommend a track. No obligation.

Lesson packs
• 5 lessons — 10% off
• 10 lessons — 20% off
• Packs are paid upfront and valid for 3 months

What's included
• 1-on-1, tailored to your level — no heavy math, practical skills only
• Live screen-share; you build along
• A short session recap and "what to practice next" notes
• Message support between lessons for quick questions

Policies
• Rescheduling: free up to 24 hours before a lesson
• Cancellations under 24 hours are charged at 50%
• No-shows are charged in full
• Payment and messaging stay on Superprof

Raising rates
Rates increase after 5 reviews. Lock in current pricing by buying a pack!

Similar Engineering teachers in Bedok

SuperprofPrivate lessonsPrivate Engineering tutor in BedokPrivate Electronics tutor in Bedok
See more tutors

Verified degree

Zhao En's profile, qualifications and contact details have been verified by our experts

levels

All levels

All languages in which the lesson is available

English

Mandarin

Review

All of our reviews are collected by us and are 100% reliable. They correspond to real lessons experienced by the students of Zhao En.

Reviews

Evaluations include all certified reviews
as well as recommendations for Zhao En

Recommendations

Recommendations come from relatives, friends and acquaintances of the tutor

free lessons

This first lesson is free to allow you to get to know your teacher so that they can best meet your needs.

Report this ad

Describe the problem with this advert

About
All subjects
Cities
Blogs & Help